|Place of Origin:||Changzhou,Jiangsu,China(mainland)|
|Certification:||As You Required|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||Hard Carton:158*14*12 cm|
|Delivery Time:||5-8 working days|
|Payment Terms:||Negotiation, L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||10000 rolls per month|
This film offers a way to create unique, everchanging color to many interior building surfaces.
Influenced by the color of the substrate,this transparent Product provides a dichroic color effect, meaning it appears to change color,when viewed at various angles. The "Blaze" Product shift colors in the warm tones of cyan/blue/magenta in transmission and red/gold color regions of the spectrum in reflection. The "Chill" Product shift colors in the cool tones of blue/magenta/yellow in transmission and gold/blue color regions of the spectrum in reflection. The Product has a clear, pressure sensitive adhesive that can be applied to glass. A hard-coated, protective surface layer helps resist scratching during normal use. These decorative Products can be used in vertical applications on the surface of interior glass, including the interior of an outside glass wall.
|Function||Anti-uv,block sunlight,,privacy protection|
|Using||Office/home/hotel ,building glass|
Small packing:45cm/60cm/90cm 2m in a roll+shrink wrap+color insert,30rolls in a export carton
Big packing: 20m/50m in a roll,each roll in one export carton.
Excellent heat rejection on TSER & IR from shorter to longer wavelength and reduces glare by changing its characteristics through sunlight reaction.
Enhances visual and unobstructed view due to high luminous efficacy during day and time.
Reduces energy consumption on air-condition work load, thus leading to saving on energy bills, extended life-span of air-condition equipment and hassle-free maintenance.
Protect against glare to eye and skin, interior furnishing and upholstery preservation against harmful ultra-violet rays.
Enhances safety on glass against any glass breakage and shattering.
1.Drape towels / drop cloths over your glass of the windows / doors / any other parts with glass.
2.Clean window glass and frame using a razor scraper and the joy solution. Wipe and clean as thoroughly as possible, making sure that all debris is completely eliminated.
3.After cleaning, remove the release liner and apply the safety film to the clean glass. Try the “back-rolling” technique when you apply the film by rolling it onto the glass in one smooth step, minus wrinkles or creases.
4.Squeegee the film to “tack” it in place and to remove some water. On first squeegee, take out as much water from under the film and inspect the entire film for cleanliness. At this point, you can still lift the film and rinse out any remaining debris.
5.Next, trim the film with the snap blade knife and trimming tool, to fit exposed glass and achieve the correct edge margin size of approximate 1/16 inch wide. A proper job will make the border hardly noticeable.
6.Squeegee out the remaining water well. Less water under the film will help it dry faster. Next, inspect the film for the last time. At this point, the film can still allow lifting, rinsing and touch ups.
7.After inspection, seal the edges of the film tightly by wrapping a towel or a diaper around your trim tool. Use this to push out any moisture near the film’s edges to ensure clean edges and proper film bonding.
8.Rinse the installed window film and do a final inspection.